Nanjing University

School of Management and Engineering
Nanjing University | Chinese Website

Dean's Message | School Overview | Leadership | Organization | Department CSE | Faculty | Education | Research | Campus Life



Department of Control and Systems Engineering, Nanjing University

1. Introduction
Established in 2004, the Department of Control and Systems Engineering at NJU is entitled to the authority to award master degrees on the first-level discipline--Control Science and Engineering, as well as doctorate degrees on the discipline--Systems Engineering, and B.S. degrees on Automation. At present, there are more than 130 undergraduate students, 40 graduate students and 10 Ph.D. candidates in our department. The department has featured courses and 14 laboratories (including Lab of Robotics Innovation, Lab of Computer Control technology), and 4 graduate-student-oriented laboratories (including Lab of Advanced Control Technology, and Lab of Smart Sensing and Network Technology), and one academic & research center of Cognition Technology and Application.
At present the working faculty and staff includes 2 professors (with 1 doctoral supervisor), 7 associate professors and 3 lecturers and many senior engineers. Among our faculty, there are 90% who received Ph.Ds. from the famous universities in China and around the world. The faculty of the department has owned many programs, including 8 National Natural Sciences Funds, 8 National Science and Technology Key projects, 6 research programs of provinces & ministries, as well as research and development programs commissioned by the enterprises, with more than 10,000,000 RMB funding. The main research fields are: management and control of industrial enterprises, networked control, quantum control and smart robots, command and control, complex systems modeling, MES, ERP, with excellent ranking in China and hundreds of research papers (about 100 papers indexed by SCI、EI、ISTP).

2. Academics: Curriculums for Graduates


Name

Period

Credit

Term

Matrix Theory for Engineering

32

2

Autumn

Mathematical Statistics and Stochastic Process

32

2

Autumn

Basis of Functional Analysis

32

2

Autumn

Linear Systems Theory

48

3

Autumn

Optimization Theory and Method

32

2

Autumn

Optimal Control Theory

32

2

Autumn

System Identification and Adaptive Control

48

3

Spring

Signal Detection: Theory and Technique

32

2

Autumn

Basis of Software Development

48

3

Spring

Data Analysis and Information Systems

32

2

Autumn

Basis of Intelligent Technique

32

2

Autumn

Pattern Recognition

48

3

Spring

Intelligent Control and Robotics

48

3

Autumn

Advanced Control Technology and Applications

48

3

Autumn

Robust Control Theory

32

2

Spring

Enterprise Resource Management and Control

32

2

Autumn

Analysis and Design of Information Systems

32

2

Autumn

Systems Approaches and Application

32

2

Spring

Network and Communication

32

2

Spring

Nonlinear Control Theory

32

2

Spring

C2 Theory and Techniques

32

2

Spring

Disciplinary Lectures

32

2

Spring

3. Research Areas
(1). Modeling, control and optimization of complex systems
(2). Management and control of industrial enterprises
(3). Intelligent sensing and automatic equipment
(4). Pattern recognition and intelligent systems
(5). Networked control systems
(6). Mobile robotics

4. Academic Faculty

Prof. Dr. Xianzhong Zhou (Email: zhouxz@nju.edu.cn)
Prof. Zhou received B.Sc. and M.Sc. degrees in system engineering and a Ph.D. degree in control theory and application from Nanjing University of Science and Technology, Nanjing, China. Currently, he is the professor of Control Science and Engineering at the School of Management and Engineering, Nanjing University, Nanjing, China. His professional interests include intelligent information processing and intelligent systems (novel decision-making system theory based on humanware technology, rough set theory and applications); modeling, control, and optimization of complex systems (mission planning theory and technology of networked swarms system); future integrated automation systems, etc. Prof. Zhou is one of the people selected for “333 Engineering” of Jiangsu Province (2002, 2007), Excellent Science and Technology Worker of Jiangsu Province (2000). He is the executive director of Systems Engineering Society of China(SESC), the vice-president of Systems Engineering Society of Jiangsu Province, and the member of IEEE.

A/Prof. Dr. Zhangqing Zhu (Email: zzqing@nju.edu.cn)
Dr. Zhu was born in Wuwei, Anhui province, China, in 1968. He received a B.S and M.S from Hefei Industry University in 1990 and 2000, and a PHD degree from the Department of Automation of Nanjing of Science and Technology in 2006. Currently, he is an associate professor in the Department of Control and System Engineering of Nanjing University. His research interests include Motion control systems, the fault detection and diagnosis for nonlinear system and networked control systems. In the academic publication, he has published 40 papers in academic periodicals and international conferences in the domestic and overseas. More than ten articles are cited by SCI/EI. His main academic monograph is “The FDD theory and method for NCS” which has been published by the oversea press. He has authored one textbook and is involved in editing two academic monographs. Dr. Huaxiong Li (Email: huaxiongli@nju.edu.cn)
Dr. Huaxiong Li is an assistant professor at School of Management and Engineering, Nanjing University. He received his M.E. degree in Control Theory from Southeast University, China, in 2006, and his Ph.D. degree in Management Science and Engineering from Nanjing University in 2009. He received a China Scholarship Council scholarship which supported him as a Visiting Scholar at the University of Regina, Canada from 2007 to 2008. His research interests include data mining, machine learning, and pattern recognition, especially theoretical analysis on feature extraction and selection from multi-modal data and image data sets, as well as their applications. His recent interest focuses on cost-sensitive learning and subspace learning for feature extraction in image data sets. He has published over 20 International Journal/Conference papers and 2 monographs, and served as Co-Chair of the 8th International Conference on Rough Sets and Current Trends in Computing, and the Publicity Chair of the 6th International Conference on Rough Sets and Knowledge Technology. Currently he is an IEEE Computer Society member, a China Computer Federation member and a Committee Member of Rough Set and Soft Computation Society, Chinese Association for Artificial Intelligence.

Dr. Bo Wang (Email: bowangsme@nju.edu.cn)
Dr. Bo Wang was born in 1986, he received a B.Sc. degree (2003.8-2007.6) in software engineering from Southeast University, Nanjing, China and a M.Sc. (2007.9-2009.9) and Ph.D. (2009.9-2012.9) degrees from the Graduate School of Information, Production and Systems, Waseda University, Japan. He was a Research Assistant (2009.10-2012.3) of the Global COE Program, Waseda University, Ministry of Education, Culture, Sports, Science and Technology, Japan. After that, he was a Special Research Fellow (2012.4-2014.3) of the Japan Society for the Promotion of Science (JSPS). He is now with the Department of Control and Systems Engineering, Nanjing University from April, 2014. His research interests include, system engineering, especially portfolio selection theory, power supply systems, fuzzy set theory and Meta-heuristic algorithms.

Dr. Pei Yang (Email: yangpei@nju.edu.cn)
Dr. Pei Yang received her B.Sc. degree in computer science from Nanjing University of Information Science and Technology, China, in 1998, a M.Sc. degree in System Engineering from Nanjing University of Information Science and Technology, China, in 2001 and Ph.D. degrees in Computer Science from Nanjing University, China in 2005. She is now a lecturer with the Department of Control and Systems Engineering, Nanjing University. Her research interests focus on Machine Learning and Distributed Artificial Intelligence.

A/Prof. Dr. Chunlin Chen (Email: clchen@nju.edu.cn)
Dr. Chunlin Chen was born in Anhui, China, in 1979. He received a B.E. degree in automatic control and a Ph.D. degree in pattern recognition and intelligent systems from the University of Science and Technology of China, Hefei, China, in 2001 and 2006, respectively. He was a Visiting Scholar with Princeton University, Princeton, NJ, USA, from September 2012 to August 2013. He is currently an Associate Professor with the Department of Control and System Engineering, Nanjing University, Nanjing, China. His current research interests include machine learning, intelligent control, mobile robotics, and quantum control.


Copyright © Nanjing University, School of Management and Engineering 南京大学工 程管理学院 地址:南京市鼓楼区平仓巷5号 邮编:210008